Serving the Wichita area  ·  (316) 330-3219  ·  Open Mon-Sun 7am-7pm
📞 (316) 330-3219 Free Quote

Metal Roofing in Haysville, KS (67060) · Local Professionals

Wichita Metal Roofing · Fast response in Haysville and the Wichita area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Haysville is a working town where ranch homes and older farmhouses sit on wide lots along the Arkansas River bottom, and the spring hail that rolls through Sedgwick County hits every one of them. If your roof is showing bruised shingles, faded metal panels, or leaks after a storm, you are not alone.

We are Wichita Metal Roofing, and since 2009 we have been installing, repairing, and replacing metal roofs for homeowners in Haysville (67060) and the surrounding Wichita area. From the neighborhoods near Haysville Middle School to the rural properties out toward the county line, we know how this town's roofs take a beating and how to make them last.

Metal Roofing in Haysville (67060)

Haysville sits on flat ground with tight soil and plenty of wind, and that combination matters for your roof. Most homes here are single-story ranches from the 1950s through the 1980s, many with low-slope sections and original shingles that have been patched a time or two. The hail we get in Sedgwick County is the real enemy: it cracks shingle mats, dents soft metal vents, and loosens fasteners over time. When we install a metal roof here, we pay attention to the little things that fail first, like the flashing around chimneys and the sealant at panel ends where wind-driven rain works its way in. We also see a lot of older detached garages and shops on these properties, and we can handle those with the same crew and the same warranty.

Our team has been serving Haysville and the Wichita area since 2009, and we are a Metal Roofing Alliance member. We are fully insured with general liability and workers' compensation, and we pull the proper permits for every job.

Our services in Haysville

How a Job Works in Haysville

Step 1: You call us at (316) 330-3219 or send a message, and we set up a free on-site assessment. We walk the roof, check the attic if needed, and look at the flashing, fasteners, and panels. You get a written estimate with options, not a high-pressure sales pitch.

Step 2: Once you approve the scope, we schedule the work and handle the permit through the City of Haysville. On tight residential streets near the older part of town, we stage materials carefully so we do not block driveways or neighbors. For retrofits over existing shingles, we confirm the layer count and condition before we start, and we coordinate with any HOA design rules if your subdivision has them.

Step 3: We clean up every day and do a final walkthrough with you. That means magnet sweeping for nails, hauling away old material, and making sure you know how the new roof sheds water and what to check after a storm. We leave your property clean and your roof ready for the next Kansas spring.

Pricing in Haysville depends on the size and pitch of your roof, how many layers are coming off, access around the house, and whether there is damage to the decking. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over shingles at $7. Smaller jobs like metal roof repair or leak repair start at $450, screw replacement and re-fastening at $750, and flashing or chimney repair at $600. Coating and painting starts at $2.50 per square foot, and gutters for metal roofs start at $9 per linear foot. We give free estimates, so call (316) 330-3219 and we will put real numbers on your project.

✅ Metal Roofing Alliance Member, licensed and insured for work in Haysville and nearby areas.

My Haysville ranch has original 1970s shingles and some hail bruises. Is it worth switching to metal instead of another shingle roof?
In Haysville, where hail is a yearly event, metal often makes more sense over the long haul. A Class 4 impact-rated metal roof can handle hail that would bruise or crack asphalt shingles, and it sheds the wind-driven rain we get in spring storms. We can also do a retrofit over your existing shingles if the deck is solid, which saves on tear-off and disposal. We will tell you honestly whether a repair or a full replacement is the better call for your house.
A storm just peeled back some panels on my roof in Haysville. How fast can you get out there?
We treat wind-lifted panels and active leaks as priority calls. Call (316) 330-3219 and we will schedule the soonest available inspection, often within a day or two depending on storm volume. We can tarp or secure the area to prevent further water damage, then give you a written repair estimate. We do not promise insurance coverage, but we document the damage thoroughly so you have what you need for your claim.
What does a typical metal roof cost for a 1,500 square foot ranch in Haysville?
For a house that size, a basic corrugated or ribbed panel roof might start around $5.50 per square foot, while standing seam runs closer to $10 per square foot. A retrofit over existing shingles starts at $7 per square foot. The final number depends on roof complexity, how many penetrations there are, and whether any decking needs repair. We give free estimates so you can see the real range for your specific roof.
Do I need a permit for a metal roof in Haysville, and who handles it?
Yes, roofing permits are commonly required for a full replacement or re-roof in Haysville, and the rules on layers, fees, and inspections vary. We pull the permit for you and coordinate the inspection. For the most current requirements, check the City of Haysville website or call the building department directly. We stay on top of local code so you do not have to.
My neighbor's tree limbs hang over my roof line in Haysville. Can you trim them back or do I need to talk to my neighbor first?
We do not trim trees, but we can repair any damage from fallen limbs and install a roof that resists punctures better. Property line issues are between you and your neighbor, and in Kansas you generally have the right to trim branches that cross onto your property, but it is always best to have a conversation first. If your HOA has rules about tree maintenance, check with them as well. We can recommend a good local tree service if you need one.
Are you insured for work on my Haysville property?
Yes, we are fully insured with general liability and workers' compensation coverage. That protects you if anything goes wrong on the job, and it is something you should always ask any contractor before they start work. We are happy to provide a certificate of insurance on request.
What should I do to maintain my metal roof in Haysville between hail seasons?
After each major storm, take a look from the ground for dented panels, loose fasteners, or debris in the valleys. Once a year, clear leaves and twigs from gutters and check that sealant around flashing and vents is intact. In late fall, before winter ice, make sure snow guards are secure if you have them. We offer free inspections, so if you are not comfortable on a ladder, call us at (316) 330-3219 and we will take a look.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Wichita

All your work handled by qualified professionals in Wichita

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Wichita

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Wichita · Response within 24h · No commitment · ☎ (316) 330-3219

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Wichita ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm