Serving the Wichita area  ·  (316) 330-3219  ·  Open Mon-Sun 7am-7pm
📞 (316) 330-3219 Free Quote

Metal Roofing in Goddard, KS (67052) · Local Professionals

Wichita Metal Roofing · Fast response in Goddard and the Wichita area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Goddard, Kansas is a small city with a big rural streak, where new two-story homes in subdivisions off Kellogg sit a few miles from wheat fields and machine sheds. The housing stock runs from post-war ranches and farmhouses to modern builds with steep pitches, and the flat plains around town mean wind and hail hit every roof with nothing to slow them down.

Homeowners in Goddard (67052) call Wichita Metal Roofing because we understand both sides of town: the residential streets near the Goddard schools and the farmsteads out on the county roads. We have been installing, repairing, and replacing metal roofs since 2009, and we know how to handle the panel roofs, re-screwing, and barn work that this part of Sedgwick County needs.

Metal Roofing in Goddard (67052)

Goddard sits on flat, open ground where the wind rarely stops. That means two things for metal roofs here: fasteners work loose over time, and panels can lift at the seams during a spring storm. We see a lot of older farmhouses and machine sheds with corrugated or ribbed panel roofs that just need a good re-screw and new washers, and we see newer homes in the subdivisions that want standing seam or stone-coated steel to handle hail. The soil here is heavy clay in places, so we pay attention to drainage and make sure gutters and downspouts move water away from the foundation. Access can be tight on some of the older lots near downtown Goddard, and we plan for that before the crew shows up.

Our team has been serving Goddard and the surrounding Wichita area since 2009. We are a Metal Roofing Alliance member, fully insured with general liability and workers' compensation, and we handle everything from a single leak repair to a full roof replacement on a barn or a commercial shop.

Our services in Goddard

How a Job Works in Goddard

Step 1: You call us at (316) 330-3219 or request a free estimate online. We schedule an on-site assessment at your Goddard property, whether it is a house in town or a farm building out on a gravel road. We inspect the roof, check the fasteners, seams, and flashing, and talk through what you need. You get a written estimate with clear pricing before any work starts.

Step 2: Once you approve, we pull the required roofing permit through the local building department (rules vary by jurisdiction, so we confirm what applies to your address) and schedule the work. For a re-roof or a repair, we protect your landscaping and move materials carefully. On tighter lots in older parts of Goddard, we stage materials in the driveway or on the street according to local rules. If your home is in an HOA or a historic district, we help you get the design approval for panel profile and color before we order materials.

Step 3: When the job is done, we clean up thoroughly. We magnet-sweep for nails, haul away old materials, and walk the roof and gutters with you to make sure everything is right. We do not leave until you are satisfied.

Pricing for metal roofing in Goddard depends on the size of the roof, the pitch, access, the condition of the existing roof, and how soon you need it done. For a typical home, metal roof installation starts around $8 per square foot, standing seam starts around $10 per square foot, and a full replacement starts around $9 per square foot. If you want to go over existing shingles, a retrofit starts around $7 per square foot. Repairs start at $450, and screw replacement or re-fastening starts at $750. Corrugated and ribbed panel roofing, common on barns and shops here, starts at $5.50 per square foot. We give free estimates, so call (316) 330-3219 and we will give you a realistic number for your Goddard property.

✅ Metal Roofing Alliance Member, licensed and insured for work in Goddard and nearby areas.

My barn off the county road near Goddard has corrugated panels that are backing out screws. Can you fix that without replacing the whole roof?
Yes. Screw replacement and re-fastening is one of our most common jobs on farm buildings around Goddard. We replace the old screws with new ones that have proper washers, check the panels for damage, and make sure everything is sealed tight. If the panels are still in good shape, this can add years to the roof. We start at $750 for this service and give you a free estimate first.
A storm just blew through Goddard and lifted some panels on my roof. How fast can you get out there?
We offer free inspections for storm and wind damage, and we prioritize active leaks and lifted panels. Call us at (316) 330-3219 and we will schedule the soonest available appointment. We can tarp or secure the roof if needed and give you a written estimate for the repair, which you can use for insurance documentation.
What does a metal roof cost for a typical house in Goddard?
Most homeowners in Goddard pay between $8 and $12 per square foot for installation, depending on the material and complexity. A basic corrugated panel roof starts around $5.50 per square foot, while standing seam or stone-coated steel runs higher. We give free estimates so you can get an exact price for your home.
Do I need a permit to replace my roof in Goddard?
Roofing permits are commonly required for a full replacement or re-roof, and the rules can vary depending on your location. We recommend checking with the local building department before you start. You can find contact information on the City of Goddard website through Sedgwick County. We handle the permit process for you as part of the job.
My neighbor's tree branches hang over my roof in Goddard. What are my options if I need roof work?
If branches are causing damage or blocking access, you may need to talk with your neighbor about trimming. For roof work, we can work around overhanging limbs, but we may need clearance to do the job safely. If you are in an HOA, check the rules about property lines and tree maintenance. We can advise during the free inspection.
Are you insured for work on my property in Goddard?
Yes, we are fully insured with general liability and workers' compensation coverage. That protects you and your property while our crew is on site. We can provide a certificate of insurance upon request.
What kind of maintenance does a metal roof need in Goddard's climate?
Goddard's wind and hail can loosen fasteners and damage panels over time. We recommend an annual inspection, especially after storm season, to check screws, seals, and flashing. Keeping gutters clean and trimming overhanging branches also helps. We offer free estimates for inspections and can set up a maintenance plan.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Wichita

All your work handled by qualified professionals in Wichita

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Wichita

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Wichita · Response within 24h · No commitment · ☎ (316) 330-3219

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Wichita ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm