Serving the Wichita area  ·  (316) 330-3219  ·  Open Mon-Sun 7am-7pm
📞 (316) 330-3219 Free Quote

Metal Roofing in Clearwater, KS (67026) · Local Professionals

Wichita Metal Roofing · Fast response in Clearwater and the Wichita area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Clearwater, Kansas, is a small farm town where the grain elevators and the old downtown brick storefronts sit a short drive from Wichita. Most homes here are modest ranches and farmhouses on generous lots, many with a barn, shop, or machine shed out back, and the flat open plains mean the wind never really stops. If you live near the high school or out on a gravel road toward the Ninnescah, you know the roof takes a beating from sun, hail, and that constant Kansas breeze.

Homeowners in Clearwater (67026) call Wichita Metal Roofing because we understand rural roofs. The hot summers crack washers and fade paint on older barns and shops, and spring storms can peel back panels on a house before you even get the truck in the driveway. We have been serving Clearwater and the surrounding Wichita area since 2009, and we are a Metal Roofing Alliance member, fully insured with general liability and workers' compensation.

Metal Roofing in Clearwater (67026)

Clearwater sits on flat ground with a mix of small residential streets and wide farm lots. The housing stock ranges from mid-century ranches to older farmhouses with original barns and outbuildings. Many properties have long gravel drives, detached shops, and mature trees that drop limbs in a storm. The soil here is heavy clay in places, so drainage around the foundation matters, and roof runoff can pool if gutters are not sized right. We see a lot of screw replacement and re-fastening on agricultural buildings because the summer heat and wind work the fasteners loose over time. Ice damming is less common than in hilly country, but winter ice storms can still back water up under the eaves on older homes with poor attic insulation. We handle everything from standing seam on a new build to a metal roof over shingles on a 1950s ranch, and we know how to work around tight lots and outbuildings without tearing up your yard.

Our team has been installing, repairing, and replacing metal roofs across Clearwater and the Wichita area since 2009, and we bring that experience to every job, big or small.

Our services in Clearwater

How a Job Works in Clearwater

Step 1: You call us at (316) 330-3219 or request a free estimate online. We schedule an on-site assessment at your Clearwater property, look at the roof, the fasteners, the flashing, and the attic if needed, and talk through options. You get a written estimate with no pressure and no surprises.

Step 2: Once you approve, we pull the required permits through the local building department and schedule the work. On farm properties, we plan around gates, equipment, and livestock so we do not disrupt your day. If your home is in a subdivision with an HOA, we help you submit the panel profile and color for approval before we order materials. Our crews are registered and insured, and we keep the site organized so you can still get in and out of your driveway.

Step 3: When the job is done, we walk the property with you, clean up every nail and scrap, and make sure you know how to care for the new roof. We leave your place as clean as we found it, or better.

Pricing for metal roofing in Clearwater depends on the size and pitch of your roof, the material you choose, and how much prep work is needed. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you want to go over existing shingles, retrofit starts at $7 per square foot, and corrugated or ribbed panel roofing starts at $5.50 per square foot, which is a common choice for barns and shops. Repairs start at $450, screw replacement and re-fastening at $750, and flashing or chimney repair at $600. Coating and painting starts at $2.50 per square foot, and gutters for metal roofs start at $9 per linear foot. Storm and wind damage inspections are free. Call (316) 330-3219 for a free estimate tailored to your Clearwater property.

✅ Metal Roofing Alliance Member, licensed and insured for work in Clearwater and nearby areas.

My barn roof in Clearwater has loose screws and some rusted washers. Can you fix that without replacing the whole roof?
Yes. Screw replacement and re-fastening is one of our most common jobs on Clearwater farm buildings. We pull the old fasteners, replace the washers and screws with proper sealing washers, and check the panels for any damage. If the rust is isolated, we can treat and coat those areas. We will give you an honest assessment during a free inspection.
A storm just blew through Clearwater and lifted some panels on my house. How fast can you get out?
We prioritize active leaks and storm damage. Call us at (316) 330-3219 and we will schedule a free inspection as soon as possible, often within a day or two depending on the season. We can tarp or secure the roof to prevent further damage and then give you a written repair estimate.
What does a typical metal roof cost for a 1,500 square foot ranch in Clearwater?
For a ranch that size, a basic corrugated or ribbed panel roof might run around $8,000 to $12,000 installed, while standing seam could be $15,000 or more. The exact price depends on roof pitch, tear-off, and trim details. We provide a free estimate so you know the real number for your home.
Do I need a permit for a metal roof in Clearwater, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof in Clearwater, and the rules can vary. We pull the permits for you and coordinate the inspections. For specific requirements, check with the City of Clearwater through the Sedgwick County website at https://www.sedgwickcounty.org or call the local building department.
My neighbor and I share a property line, and I want to make sure my new metal roof does not cause drainage issues on their side. What should I do?
We can adjust gutter placement and downspouts to direct water away from the property line. If you are in an HOA, we also help with the approval process for panel style and color. It is always smart to talk with your neighbor before the work starts so everyone knows the plan.
Are you insured for work on my Clearwater property?
Yes, we are fully insured with general liability and workers' compensation coverage. We are happy to provide a certificate of insurance before we start any work on your home or farm building.
What kind of maintenance does a metal roof need in Clearwater's climate?
Check the fasteners and washers every couple of years, especially after a big hail or wind event. Keep gutters clear of leaves and debris, and touch up any scratches or exposed metal to prevent rust. We offer inspections and coating services to extend the life of your roof, and we can set up a maintenance plan if you want.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Wichita

All your work handled by qualified professionals in Wichita

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Wichita

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Wichita · Response within 24h · No commitment · ☎ (316) 330-3219

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Wichita ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm