Serving the Wichita area  ·  (316) 330-3219  ·  Open Mon-Sun 7am-7pm
📞 (316) 330-3219 Free Quote

Metal Roofing in Cheney, KS (67025) · Local Professionals

Wichita Metal Roofing · Fast response in Cheney and the Wichita area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Cheney sits just west of Wichita along US-54, where the open prairie starts to take over and the wind comes across Cheney Lake without much to stop it. The housing stock here is a mix of older farmhouses on generous lots, mid-century ranches closer to town, and newer builds on the edges, many of them with simple gable roofs that catch every gust and hailstone that rolls through Sedgwick County.

Homeowners in Cheney (67025) call Wichita Metal Roofing because we understand how that wind works on a roof. Whether you are near the lake, off 383rd Street, or closer to Cheney High School, we have seen how loose trim and lifted panels start small and turn into leaks. We have been serving the Wichita area since 2009, and we bring that same local knowledge to every Cheney job.

Metal Roofing in Cheney (67025)

Cheney properties sit on flat to gently rolling ground, and that means water has to be managed carefully. Older farmhouses often have shallow roof pitches and minimal overhangs, so ice damming at the eaves and splash-back against the foundation are real concerns. Newer homes in the subdivisions around Cheney sometimes have tighter lot lines, which can make staging materials and getting a ladder set up a bit more of a puzzle. And out on the acreages, we run into everything from grain bins and shops to barns that need agricultural metal roofing. The wind out here is relentless, so we pay close attention to fastener spacing, panel gauge, and edge metal, because that is where wind damage usually starts.

Our team has been working in and around Sedgwick County since 2009, and we are a Metal Roofing Alliance member. We are fully insured with general liability and workers' compensation, and we handle both residential and commercial metal roofing in Cheney.

Our services in Cheney

How a Job Works in Cheney

Step 1: You call us at (316) 330-3219 or request a free estimate online. We schedule a time to come out and look at your roof, whether it is a small repair or a full replacement. We will inspect the roof, check the flashing and fasteners, and talk with you about what we find. You get a written estimate before any work begins.

Step 2: Once you approve the estimate, we schedule the work. For a full replacement, we pull the required roofing permit through the local building department, and we coordinate with any HOA design review if your neighborhood has one. On tight lots near the lake or in town, we plan where to stage materials so we do not block driveways or damage lawns. For storm damage, we document everything for your insurance claim and get the roof dried in quickly if it is an active leak.

Step 3: When the job is done, we clean up thoroughly. We magnet-sweep for nails, haul away old materials, and walk the property with you to make sure you are satisfied. We leave your yard and driveway as clean as we found them.

Pricing for metal roofing in Cheney depends on the size of your roof, the pitch, how accessible it is, and the condition of the existing roof. As a ballpark, metal roof installation starts around $8 per square foot, standing seam starts around $10 per square foot, and a full replacement starts around $9 per square foot. If you are retrofitting over existing shingles, that starts around $7 per square foot. Repairs and leak fixes start around $450, screw replacement and re-fastening starts around $750, and flashing or chimney repair starts around $600. For a free estimate on your Cheney property, call us at (316) 330-3219. We will give you a straight answer and a written price.

✅ Metal Roofing Alliance Member, licensed and insured for work in Cheney and nearby areas.

My house is near Cheney Lake and the wind really hits the west side. What kind of metal roof holds up best out there?
For open, windy sites like the ones near Cheney Lake, we usually recommend standing seam metal roofing because it has concealed fasteners and no exposed screws for the wind to work loose. We also make sure the edge metal and trim are fastened to the manufacturer's spec, because that is where wind uplift starts. If you have a simpler gable roof, a heavier gauge corrugated or ribbed panel with proper screw spacing can also do well. We will look at your specific roof and exposure before recommending anything.
A storm just peeled back some panels on my barn and it is leaking. How fast can you get out to Cheney?
We handle storm and wind damage repair in Cheney and the surrounding area. Call us at (316) 330-3219 and we will schedule a free inspection as soon as we can, usually within a day or two depending on how many calls we are handling after a storm. If there is an active leak, we can do temporary dry-in to stop the water while we wait for materials or insurance approval.
What does a typical metal roof replacement cost for a ranch house in Cheney?
For a typical single-story ranch in Cheney, a metal roof replacement often lands somewhere between $9 and $14 per square foot installed, depending on the panel type, roof complexity, and whether we are removing the old shingles. That is a ballpark, not a quote. The only way to know for sure is to have us out for a free estimate. Call (316) 330-3219 and we will measure and give you a written price.
Do I need a permit to replace my roof in Cheney, and who handles that?
Roofing permits are commonly required for a full replacement or re-roof in Sedgwick County, and the rules can vary by jurisdiction. We pull the required permits for your job and coordinate the inspections. You can check with the City of Cheney's official site through Sedgwick County for local rules, or just ask us and we will walk you through what applies to your address.
My neighbor's tree limbs hang over my roof and I am worried about property lines. What should I do before I have work done?
It is always best to talk with your neighbor before any work starts if limbs or debris cross the property line. We can trim back what is over your roof with your permission, but we cannot cut anything on your neighbor's side without their OK. If your neighborhood has an HOA, we will also coordinate any required design approval for panel profile and color before we order materials.
Are you insured for work on my Cheney property?
Yes, we are fully insured. We carry general liability and workers' compensation coverage, and we are happy to provide proof of insurance before we start. That protects you and your property if anything goes wrong on the job.
What maintenance should I do on a metal roof in Cheney to keep it from leaking?
The biggest thing in this climate is checking fasteners and sealant washers once a year, especially after a hail season or a big wind event. Look for loose screws, backed-out fasteners, or gaps at flashing and penetrations. We offer metal roof inspections and can replace screws and re-fasten panels if needed. Keeping gutters clear and checking the eaves for ice damming in winter also helps. Call us at (316) 330-3219 if you want us to take a look.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Wichita

All your work handled by qualified professionals in Wichita

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Wichita

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Wichita · Response within 24h · No commitment · ☎ (316) 330-3219

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Wichita ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm