Serving the Wichita area  ·  (316) 330-3219  ·  Open Mon-Sun 7am-7pm
📞 (316) 330-3219 Free Quote

Metal Roofing in Bel Aire, KS (67220) · Local Professionals

Wichita Metal Roofing · Fast response in Bel Aire and the Wichita area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Bel Aire is a city of newer subdivisions and wide, flat lots just northeast of Wichita, where the wind hits hard and hail comes with the spring storms. If you live off Rock Road or near the Bel Aire Recreation Center, you know the sound of a big storm rolling in across the plains.

Homeowners in Bel Aire (67220) call Wichita Metal Roofing because we have been installing and repairing metal roofs here since 2009. We know the local housing stock, from the newer two-story homes in Bel Aire to the older ranches and cottages nearby, and we show up ready to work.

Metal Roofing in Bel Aire (67220)

Bel Aire sits on flat, open ground where the wind never really stops, and that shapes every roofing decision. The newer homes in subdivisions like those off 53rd Street North and Rock Road often have complex rooflines with multiple valleys and dormers, which means more seams and flashing points that need to be done right. The soil here is heavy Kansas clay that shifts with moisture, so proper drainage and gutter sizing matter as much as the panels themselves. We also see a lot of ice damming at the eaves on two-story homes during winter storms, especially when gutters are undersized or clogged. And after every hail season, more homeowners are asking about Class 4 impact-rated metal and stone-coated steel, which can help with insurance and peace of mind.

Our team has been serving Bel Aire and the surrounding Wichita area since 2009, and we are a Metal Roofing Alliance member. We handle everything from standing seam installation to leak repair and snow guards, and we know how to work with the local building department on permits.

Our services in Bel Aire

How a Job Works in Bel Aire

Step 1: You call us at (316) 330-3219 or request a free estimate online. We schedule an on-site assessment at your Bel Aire property, usually within a few days, and we inspect the roof, attic, and gutters. We give you a written scope and a clear price before any work starts.

Step 2: Once you approve, we pull the required permits through the local jurisdiction and coordinate with your HOA if you have one. On tight lots or steep drives, we plan material staging carefully so we do not block neighbors. Our crews are fully insured, and we protect landscaping and siding during tear-off and installation.

Step 3: When the work is done, we walk the property with you, magnet-sweep for nails, and haul away all debris. We leave your yard and driveway clean, and we do a final inspection to make sure everything is watertight and secure.

Pricing for metal roofing in Bel Aire depends on the size and complexity of your roof, the material you choose, and whether we are installing over existing shingles or doing a full tear-off. As a ballpark, corrugated and ribbed panel roofing starts at $5.50 per square foot, metal roof installation starts at $8 per square foot, and standing seam starts at $10 per square foot. Metal roof replacement starts at $9 per square foot, and a retrofit over shingles starts at $7 per square foot. Repairs and leak fixes start at $450, screw replacement and re-fastening start at $750, and flashing, chimney, or skylight repair starts at $600. Snow guards and ice protection start at $1,200. For a free estimate tailored to your Bel Aire home, call (316) 330-3219.

✅ Metal Roofing Alliance Member, licensed and insured for work in Bel Aire and nearby areas.

My Bel Aire home is in one of the newer subdivisions off Rock Road. Do I need a permit for a metal roof, and who handles it?
Yes, most full replacements and re-roofs in Bel Aire require a permit, and the rules vary by jurisdiction. We handle the permit application and inspections for you as part of the job. You can also check with the City of Bel Aire through Sedgwick County's resources for general information, but we will confirm the specific requirements for your address.
A storm just blew through Bel Aire and lifted some panels on my roof. How fast can you respond?
We offer free storm and wind damage inspections in Bel Aire and the surrounding area. Call us at (316) 330-3219, and we will schedule an assessment as soon as possible, usually within a day or two depending on demand. We can tarp or secure the roof if there is an active leak and then give you a repair plan.
What does a typical metal roof repair cost in Bel Aire?
Most repairs in Bel Aire start around $450 for leak fixes and minor flashing work. Screw replacement and re-fastening starts at $750, and larger repairs involving panels or seams can run higher. The final price depends on the extent of the damage, roof access, and material matching. We give you a firm quote after inspecting the roof.
Does Bel Aire have any historic district rules that affect metal roofing?
Bel Aire does not have large historic districts like some older Wichita neighborhoods, but there may be HOA design guidelines or local code requirements for certain areas. We recommend checking with the city and your HOA before choosing a panel profile or color. We can help you understand what is allowed and coordinate the paperwork.
My neighbor's tree limbs hang over my roof in Bel Aire. What are my options if they cause damage?
In Kansas, you generally have the right to trim branches that overhang your property line, but it is best to talk with your neighbor first. If a limb from their tree damages your roof, your insurance may cover the repair, and we can provide documentation for the claim. We can also install snow guards or trim back overhanging branches as part of the job to reduce future risk.
Are you insured for roofing work in Bel Aire?
Yes, we are fully insured with general liability and workers' compensation coverage. We can provide a certificate of insurance before we start any work on your Bel Aire property.
What maintenance does a metal roof need in Bel Aire's climate?
In Bel Aire, the main things are keeping gutters clear of debris, checking fasteners after big wind events, and looking for any signs of ice damming at the eaves in winter. We recommend a professional inspection every couple of years, especially after hail season. We offer free estimates for inspections and can set up a maintenance plan.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Wichita

All your work handled by qualified professionals in Wichita

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Wichita

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Wichita · Response within 24h · No commitment · ☎ (316) 330-3219

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Wichita ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm