Serving the Wichita area  ·  (316) 330-3219  ·  Open Mon-Sun 7am-7pm
📞 (316) 330-3219 Free Quote

Metal Roofing in Colwich, KS (67030) · Local Professionals

Wichita Metal Roofing · Fast response in Colwich and the Wichita area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Colwich sits right up against the Arkansas River west of Wichita, a small town where the grain elevators rise higher than most of the trees and the houses still have room for a shop or a shed out back. The housing stock here runs from older farmhouses and 1970s ranches along Main Street to newer builds on the edge of town, and nearly every property has at least one outbuilding that needs a roof that can handle Kansas weather. Whether you are on a lot near the Colwich Community Center or out on a gravel road toward the river bottoms, the wind and hail do not treat your roof gently.

Homeowners and property managers in Colwich (67030) call Wichita Metal Roofing because we have been working this corner of Sedgwick County since 2009 and we understand the difference between a roof that looks good and one that stays put through a spring supercell. We are a Metal Roofing Alliance member, fully insured, and we know the local building stock, from the older homes near the school to the machine sheds and grain bins that keep the local ag economy running.

Metal Roofing in Colwich (67030)

Colwich is flat, open, and exposed, which means the wind hits your roof with nothing to slow it down. The older homes in town often have steep gables and small dormers that catch wind, while the newer construction on the west side tends to have larger, simpler roof planes that are easier to protect with standing seam panels. Out on the edges of town, where properties are measured in acres rather than feet, we see a lot of corrugated and ribbed panel roofs on barns, machine sheds, and grain-country shops. Those buildings need panels that can span purlins and shed water fast when a summer storm dumps two inches in an hour. The soil here is heavy Kansas clay, so proper drainage at the eaves and gutters matters just as much as the roof itself, especially on older homes where the grade has settled toward the foundation over the decades.

Our team has been serving Colwich and the surrounding Wichita area since 2009, and we have handled everything from a simple leak repair on a ranch house near the high school to full standing seam installations on new builds. We know how to work around the tight lots in the older part of town and the wide-open spaces out by the river, and we always pull the right permits for the job.

Our services in Colwich

How a Job Works in Colwich

Step 1: You call us at (316) 330-3219 or request a free estimate online. We schedule a time to come out to your Colwich property, whether it is a house in town or a shop building on the edge of your field. We inspect the roof, check the flashing and fasteners, look at the gutters and drainage, and talk with you about what you are seeing and what you want. You get a written estimate before any work starts, and we answer every question you have.

Step 2: Once you approve the estimate, we schedule the work and handle the permit with the City of Colwich. You can check the City of Colwich website for general information about local government, though we always confirm the exact permit requirements with the building department before we file. Our crews are trained on both residential and agricultural metal roofing, and we take care to protect your landscaping and outbuildings while we work. If your property has a tight driveway or a fence line that limits access, we plan for that ahead of time so there are no surprises.

Step 3: When the job is done, we clean up every nail, scrap, and old fastener. We walk the roof with you, show you the finished work, and make sure you know how to care for your new metal roof. We do not leave until you are satisfied and your property is as clean as we found it.

Pricing for metal roofing in Colwich depends on the size of your roof, the pitch, how many layers are already on it, and what kind of metal you choose. As a ballpark, metal roof installation starts at $8 per square foot, standing seam starts at $10 per square foot, and metal roof replacement starts at $9 per square foot. If you are retrofitting over existing shingles, that starts at $7 per square foot, and corrugated or ribbed panel roofing starts at $5.50 per square foot, which is often the choice for barns and shops. Repairs start at $450, screw replacement and re-fastening starts at $750, and flashing or chimney repair starts at $600. We give free estimates, so call (316) 330-3219 and we will come out to your Colwich property and give you a real number, not a guess.

✅ Metal Roofing Alliance Member, licensed and insured for work in Colwich and nearby areas.

My barn west of Colwich has corrugated panels that are pulling loose at the fasteners. Can you fix that without replacing the whole roof?
Yes, that is one of the most common jobs we do in the Colwich area. We can replace the failed screws with new ones that have proper washers, re-fasten any panels that have backed out, and check the purlins for rot or damage. If the panels themselves are still sound, a screw replacement and re-fastening job starts at $750 and can add years to the life of your barn roof.
A storm just took off some panels on my house near the Colwich school. How fast can you get out here?
We treat storm and wind damage as a priority. Call us at (316) 330-3219 and we will schedule a free inspection as soon as possible, usually within a day or two depending on how many calls we are handling after a storm. We can tarp or secure the roof if needed and give you a written estimate for the repair.
What does a typical metal roof replacement cost for a 1,500 square foot ranch house in Colwich?
For a ranch house that size, a basic corrugated or ribbed panel roof might start around $5.50 per square foot, while standing seam would start around $10 per square foot. That means a ballpark range of roughly $8,000 to $15,000 depending on the material, pitch, and whether we are removing old shingles. We give free on-site estimates so you get an accurate number for your specific roof.
Do I need a permit to replace my roof in Colwich, and can you handle that for me?
Roofing permits are commonly required for a full replacement or re-roof in Colwich, and the rules can vary, so we always confirm the current requirements with the local building department before we start. We handle the permit application for you as part of the job. You can also check the City of Colwich website for general information, but we will make sure everything is filed correctly.
My neighbor and I share a property line, and I want to make sure the new roof does not cause drainage problems onto their lot. How do you handle that?
We look at the grade and drainage on every job, especially on older lots in town where the ground has settled over time. We can adjust gutter placement and downspouts to direct water away from the property line, and we always respect property boundaries. If there is an HOA or any deed restriction, we can help you understand what is required before we order materials.
Are you insured for work on my property in Colwich?
Yes, we are fully insured with general liability and workers' compensation coverage. That protects you and your property if anything goes wrong on the job. We are happy to provide a certificate of insurance before we start work.
What should I do to maintain my metal roof in Colwich between hail seasons?
Check your gutters and downspouts each spring and fall for debris, and look at the fasteners on any exposed panels, especially on outbuildings. After a hail storm, walk around the property and look for dents or loose panels, and call us for a free inspection if you see anything. We also recommend a professional inspection every few years to catch small issues before they become leaks.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Wichita

All your work handled by qualified professionals in Wichita

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Wichita

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Wichita · Response within 24h · No commitment · ☎ (316) 330-3219

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Wichita ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm